| Item | Unit | MH 630B/S-5XB | MH 800B/S-5XB | MH 1300-5XB | ||||
| B | S | B | S | S | ||||
| Travel | ||||||||
| X axis trave (Horizontal table) |
mm | 900 | 1200 | 1700 | ||||
| Y axis trave (Vertical table) |
mm | 900 | 1200 | 1650 | ||||
| Z axis travel (Front/Rear column) |
mm | 1200 | 1200 | 1270 | ||||
| A axis travel | deg | ±120° | ±120° | -30°~+120° | ||||
| B axis travel | deg | ±360°/0.001° | ±360°/0.001° | ±360°/0.001° | ||||
| Spindle center line to pallet surface | mm | -250~+650 | -400~+800 | -500~+1150 | ||||
| Spindle nose to table center line | mm | 200~1400 | 200~1400 | 275~1545 | ||||
| Table | ||||||||
| Type | Swing | |||||||
| Table diameter | mm | Ø630 | Ø800 | Ø1300 | ||||
| T-slot | 22 | 22 | 22 | |||||
| Increments | deg | 0.001 | 0.001 | 0.001 | ||||
| Max. table loading-Vertical | kg | 300 | 600 | 5000 | ||||
| Max. table loading-Horizontal | kg | 500 | 1000 | 5000 | ||||
| B axis Max. rotation speed | rpm | 11.1 | 11.1 | 11.1 | ||||
| A axis Max. rotation speed | rpm | 5.6 | 2.7 | 5.6*2 | ||||
| Transfer method | Worm gear | |||||||
| Swing angle | ±120° | -30°~+120° | ||||||
| Spindle | ||||||||
| Spindle Taper | BT50(HSK-A100,DIN50) | |||||||
| Spindle Speed | rpm | 6000(Gear type) /10000(D.D.) | ||||||
| Spindle Power | kw | 17/22.5 | 22/23 | |||||
| Max. Torque | N-m | 1952(Gear type) /720(D.D.) | 2278 | |||||
| Feedrate | ||||||||
| Rapaid-X/Y/Z | m/min | 24/24/24 | 24/24/24 | 10/10/10 | ||||
| Rapaid-B/A | min--1 | 11.1/5.6 | 11.1/2.7 | 11.1/5.6 | ||||
| Cutting-X/Y/Z | m/min | 15/15/15 | 15/15/15 | 10/10/10 | ||||
| Cutting-B/A | min--1 | 11.1/5.6 | 11.1/2.7 | 11.1/5.6 | ||||
| Accuracy (ISO230-2﹑2006) | ||||||||
| Positioning-X/Y/Z | mm | 0.008 | 0.008 | 0.01 | ||||
| Repeatability-X/Y/Z | mm | 0.006 | 0.006 | 0.008 | ||||
| Rotate positioning-A/B | sec | 15 | 15 | 45/15 | ||||
| Reoeat rotate positioning-A/B | sec | 6 | 6 | 8/6 | ||||
*[ ] Optional